The Netgear Nighthawk X6S AC3600 Tri-Brand Wi-Fi Router is designed to give you the best internet speed possible. To make it more efficient, its design includes high-power amplifiers and antennas. It comes with a 1.8 GHz dual-core processor and helps to get a speed of up to 3.525 Gbps.
It gives you two different band options which you could select according to your requirements. Its MU-MIMO technology makes it reliable and helps to achieve great coverage.
Process for the Netgear Nighthawk X6S AC3600 Tri-Band Wi-Fi Router Setup
The Setup for the Netgear Nighthawk X6S AC3600 Tri-Band Wi-Fi Router is an easy but long process. We have categorized it here into two categories which include the hardware setup and login setup.
The Hardware setup
By following steps to do the hardware setup:
• Firstly, unplug the modem from the power supply, leaving it just connected to the wall jack for the internet services.
In case your router runs on batteries, remove the batteries.
• Then plug the modem again into the power supply and turn it on.
In case it runs on batteries, put in the batteries.
• Now take the ethernet cable. And put its one end in the internet port of the router and the other in the modem.
• Connect the router with the power supply outlet with the help of the power adapter.
• At last, to turn on the router, press the power ON/OFF button located in the back panel of the router.
Once followed the above steps, you are done with the hardware setup process of the Netgear Nighthawk X6S AC3600 Tri-Brand Wi-Fi Router.
Network and Login setup of the Router
The following information will take you through the Network and login setup part of the router setup process.
Network Setup
You can connect your device with the router using three different connections:
• a wired connection
• a WiFi connection
• or a Wifi connection using WPS.
For computers set up to use a static IP address, we suggest changing it to Dynamic Host Configuration Protocol (DHCP).
Setup for Wired Connection
• Firstly, check that your router is getting the proper power supply and the power LED is not blinking but solid.
• Then connect the one end of the ethernet cable with the ethernet port of the computer.
• And connect the other end of the Ethernet cable to the router.
Make sure that your computer is using a Local Area Network (LAN).
Setup for WiFi Connection
• Now again, Check that the router is getting a proper power supply and the power LED is not blinking but solid.
• Then, Open your computer or the device you would like to connect to the wifi. Now search for the Wifi and select it.
The Wifi network name is usually on the router’s label.
• Now join the WiFi network and fill in your password.
You can find the password too on the router’s label.
Now you have successfully connected your device to the WiFi.
Setup for wifi connection using WPS
To connect your device with the router’s Wifi network using WPS, make sure that your device has WiFi Protected Setup.
Check that the router is getting a proper power supply and the power LED on the router is solid.
Read the WPS instructions of your WPS-enabled device.
Press the WPS button of the router.
Now, wait for at least two minutes and then press the WPS button on your WPS-enabled device. Or follow the WPS instructions of your WPS-enabled device.
This way, you will be able to connect your WPS-enabled device with your WiFi network.
Login Setup
If you connect to the router first. And then open a browser on your device, the browser will automatically show you the router web interface. To change or view the router’s setting later, you could use any browser to login into the router web interface.
For the login setup of the Netgear Nighthawk X6S AC3600 Tri-Brand Wi-Fi Router, follow the following instructions:
• Open the web browser on your mobile, PC, or any other device connected to the router’s network.
• Enter the Web Address http://www.routerlogin.net or http://www.routerlogin.com.
You could also use the address of your default static IP address, which is http://192.168.1.1.
The above links will open a login page.
• On this login page, enter your admin username and password.
The default admin username is admin. Whereas, the password will be the same that you specified on the first time login. Please enter the username and password carefully, as they are case-sensitive.
The Above steps will land you on the BASIC home page.
By following all the above-given steps, you will successfully set up your Netgear Nighthawk X6S AC3600 Tri-Brand Wi-Fi Router.
No comments:
Post a Comment